教师主页移动版

个人简介 Personal Profile 同济大学电气工程系教授，博士生导师，分别于兰州大学、中国矿业大学、日本冈山大学获学士、硕士、博士学位。长期从事高电压绝缘相关研究。如，GIS/GIL中的关键绝缘问题研究，高压输电线路户外绝缘子的性能提升研究，高压电缆绝缘中的空间电荷研究，电容器介质的储能和介电性能研究。在国内外学术刊物上发表SCI和EI收录论文百余篇，曾任IEEE TDEI副主编。长期致力于通过直接氟化方法调控聚合物绝缘和高压导体等的相关性能。作为项目负责人主持与直接氟化改性相关的国家自然科学基金5项，主持国家电力公司项目多项。 研究方向Research Directions 高电压绝缘 2. 机电结构优化与控制 研究内容：在对机电结构进行分析和优化的基础上，运用控制理论进行结构参数的调整，使结构性能满足设计要求。1. 仿生结构材料拓扑优化设计, 仿生机械设计 研究内容：以仿生结构为研究对象，运用连续体结构拓扑优化设计理论和方法，对多相仿生结构(机构)材料进行2. 机电结构优化与控制 研究内容：在对机电结构进行分析和优化的基础上，运用控制理论进行结构参数的调整，使结构性能满足设计要求。1. 仿生结构材料拓扑优化设计, 仿生机械设计 研究内容：以仿生结构为研究对象，运用连续体结构拓扑优化设计理论和方法，对多相仿生结构(机构)材料进行整体布局设计。 整体布局设计。 科研项目 主持的国家自然科学基金项目1. 基于GIS/GIL金属电极和绝缘子的直接氟化抑制金属颗粒活性及提升设备颗粒耐受性的研究，2022-01至 2025-12，在研。2. 硅橡胶表层性能的直接氟化调控及相关机理研究，2017-01至2020-12，已结题。3. 基于直接氟化调控环氧树脂的表面电学性能及氟化层的老化性能研究，2013-01至2016-12，已结题。4. 聚乙烯氟化表层抑制空间电荷注入的机理及其介电特性研究，2010-01至2012-12，已结题。5. 氟化处理对高压电活性孔洞聚丙烯膜压电热稳定性的改善，2007-01至2009-12，已结题。 研究成果 [1] Xin Wang, Zhenlian An*, MiaojinZhuo, “Energy Storage Performance and Dielectric Properties of SurfaceFluorinated BOPP Films”, IEEE Trans. Dielectr. Electr. Insul. (EarlyAccess), DOI: 10.1109/TDEI.2023.3280862.[2] Zhenlian An*,Jingpeng Sun, Yong Yang, Fang Liu, and Xuguang Liu, "DC FlashoverPerformance of GIS Spacers Fluorinated at Different Temperature", IEEE Trans. Dielectr. Electr. Insul., vol. 29 (No. 3), pp. 1200-1207, 7 April 2022.      Doi: 10.1109/TDEI.2022.3165476, Print ISSN: 1070-9878, OnlineISSN: 1558-4135[3] Zhenlian An*, Yanming Qin, Tiaotiao Chen, andJingtao Xu, “Further Evidence and Mechanisms for Improvement in Tracking andErosion Resistance of ATH-Free Silicone Rubbers by Direct Fluorination”, IEEE Trans. Dielectr. Electr. Insul., vol. 29 (No. 5),pp. 1685-1692, Oct. 2022. Article DOI: 10.1109/TDEI.2022.3194493.[4] Zhenlian An*, Kang Chen, WenboHuang, Xin Wang, Feihu Zheng, and Yewen Zhang, “Moisture Barrier Properties of the Silicone Rubber Surface Layers Fluorinatedat Different Temperatures”, IEEE Trans. Dielectr.Electr. Insul., Vol. 28 (No.1), pp. 82 – 89, Feb. 2021.[5] Zhenlian An*, WeijunChen, Kang Chen, Wenjian Gao, Zihan Shen, Yong Yang, Fang Liu, Xulei Liu, ZhuoZhang, Wei Yang, and Zhaoliang Xing, “Comparative Study on Direct Fluorinationand Surface Properties of Alumina-filled and Unfilled Epoxy Insulators”, IEEE Trans. Dielectr. Electr. Insul., vol. 27, pp. 85 –93, Feb. 2020. [6] Zhenlian An*, ZihanShen, Wenjian Gao, Tiaotiao Chen, Xin Wang, Feihu Zheng, and Yewen Zhang, “Enhancement of DC Flashover of LiquidSilicone Rubber by Direct Fluorination”, IEEE Trans. Dielectr. Electr. Insul., vol. 27 (No. 6), pp. 2023 –2030, Dec. 2020.[7] Zhenlian An*, Ruochen Shen, Wenjian Gao, Xiaoxiao Gu, Weijun Chen, Long Yang, WeiYang, Zhuo Zhang, “Improved flashover performance and tracking resistance of siliconerubber by direct fluorination”, 2020 J.Appl. Polym. Sci., Vol. 137 (No. 15), p. 48556 (10pp). (Journal ofApplied Polymer Science)[8] Zhenlian An*, Ruochen Shen, Wenjian Gao, Xiaoxiao Gu,Weijun Chen, Long Yang, Wei Yang, Zhuo Zhang, “Improved flashover performanceand tracking resistance of silicone rubber by direct fluorination”, 2019 J. Appl. Polym. Sci., Vol. 137, p. 48556 (10pp).   2020 J.Appl. Polym. Sci., Vol. 137 (No. 15), p. 48556 (10pp).[9] Longkai Que, Zhenlian An*, Yong Ma, Fangting Shan, Yingyao Zhang, Feihu Zheng andYewen Zhang, “High resistance of surface fluorinated epoxyinsulators to surface discharge in SF6gas”, 2018 IEEE Trans. Dielectr. Electr. Insul.,Vol. 25, No. 1, pp. 245-252. [10] Zhenlian An*, Fangting Shan, Long Yang, Ruochen Shen, Xiaoxiao Gu, FeihuZheng and Yewen Zhang, “Unusual effect of temperature ondirect fluorination of high temperature vulcanizedsilicone rubber and properties of the fluorinated surface layers”,2018 IEEE Trans. Dielectr.Electr. Insul., Vol. 25, No. 1, pp. 190-198. [11] Zhenlian An*, Xiaoxiao Gu, Ruochen Shen, Yujiao Tang, FeihuZheng, Yewen Zhang and Long Yang, “Resistance to corona discharge of HTVsilicone rubber surface layers fluorinated at different temperatures”, 2018 IEEE Trans. Dielectr. Electr. Insul., Vol.25, No. 2,pp. 729-740. [12] Longkai Que, Zhenlian An*, Ruochen Shen,Xiaoxiao Gu, Yingyao Zhang, Feihu Zheng, and Yewen Zhang, “FlashoverPerformance and Arc Resistance of Surface Fluorinated Epoxy Insulators”, Proceedings of the 12thInternational Conference on Properties and Applications of Dielectric MaterialsMay 20-24, 2018, Xi’an, China, pp. 239-242. (Invited report)[13]Longkai Que, Zhenlian An*, Yong Ma, Danli Xie, Feihu Zheng, and Yewen Zhang,“Improveddc flashover performance of epoxy insulators in SF6 gasby direct fluorination”, 2017 IEEE Trans.Dielectr. Electr. Insul., Vol. 24, No. 2, pp. 1153-1161. [14]Zhenlian An*, Fenglei Liu, Yujiao Tang, Feihu Zheng and Yewen Zhang, “Resistance of surfacefluorinated epoxy resin to corona discharge in SF6 gas”, 2016 IEEE Trans. Dielectr. Electr. Insul., Vol.23, No. 6, pp. 3659-3667. [15] Zhenlian An*, Huanhuan Xiao, Fenglei Liu, Feihu Zheng, QingquanLei, and Yewen Zhang, “Improved resistanceof epoxy resin to corona discharge by direct fluorination”, 2016 IEEE Trans. Dielectr. Electr. Insul., Vol. 23, No. 4, pp. 2278-2287.[16] Zhenlian An*, HuanhuanXiao, Danli Xie, Feihu Zheng, Qingquan Lei, and Yewen Zhang, “Significantly EnhancedSurface Electrical Conduction of Poly(butylene terephthalate) Insulators byDirect Fluorination”, 2016 IEEETrans. Dielectr. Electr. Insul., Vol. 23, No. 1, pp. 517-524.[17] DanliXie, Zhenlian An*,Huanhuan Xiao, Feihu Zheng, Qingquan Lei and Yewen Zhang, “Highly Hydrophobicand Partially Conductive Polydimethylsiloxane Surface Produced by Direct Fluorinationand Subsequent Annealing”, 2015 IEEE Trans. Dielectr. Electr. Insul., Vol. 22,No. 5, pp. 2968-2977. [18] Zhenlian An*, Qianqian Yin, Yaqiang Liu, Feihu Zheng, Qingquan Leiand Yewen Zhang: “Modulation of surface electrical properties of epoxy resin insulator by changingfluorination temperature and time”, 2015 IEEE Trans. Dielectr.Electr. Insul., Vol. 22, No. 1, pp. 526-534. [19] Zhenlian An*, Qianqian Yin, Huanhuan Xiao, Danli Xie, Feihu Zheng,Qingquan Lei and Yewen Zhang: “Evolutions of Surface Characteristics and ElectricalProperties of the Fluorinated Epoxy Resin during Ultraviolet Irradiation”, 2015IEEE Trans. Dielectr. Electr. Insul.,Vol. 22, No. 2, pp. 1124-1133. [20] Zhenlian An*, Jun Cang, Xuan Chen, and YaqiangLiu: “Thermally Assisted Charge Injection at Electrode/Polyethylene InterfacesEvidenced by Direct Observation of Space Charge”, 2013 IEEE Trans. Dielectr.Electr. Insul., 20, pp. 1902-1908.[21] Yaqiang Liu, Zhenlian An*, Qianqian Yin, FeihuZheng, Qingquan Lei, and Yewen Zhang: “Characteristics and ElectricalProperties of Epoxy Resin Surface Layers Fluorinated at DifferentTemperatures”, 2013 IEEE Trans. Dielectr. Electr. Insul., 20, pp. 1859-1868.[22] Yaqiang Liu, Zhenlian An*, Qianqian Yin, Feihu Zheng,Yewen Zhang, and Qingquan Lei: “Rapid potential decay on surface fluorinatedepoxy resin samples”, 2013 J. Appl. Phys.,113, p. 164105 (8pp). [23] Zhenlian An*, Chenxia Liu, Xuan Chen, FeihuZheng, and Yewen Zhang: "Influence of Oxygen Impurity in FluorinatingMixtures on Charge Blocking Properties of Fluorinated Surface Layer ofPolyethylene", 2013 IEEE Trans.Dielectr. Electr. Insul., 20,pp. 303-310. [24] Zhenlian An*, Jun Cang, Xuan Chen, FeihuZheng, and Yewen Zhang: “Impact of Interface between Polyethylene and Surface FluorinatedPolyethylene on Space Charge Accumulation in the Layered Structures”, 2013 IEEE Trans. Dielectr. Electr. Insul., 20,pp. 329-336.）[25] Zhenlian An*, XuanChen, Chenxia Liu, Feihu Zheng, and Yewen Zhang: “Significantly reducedfluorination time needed for suppression of space charge in polyethylene byincreasing the fluorination temperature”, 2012 J. Phys. D: Appl. Phys. 45(2012) 385303 (8pp). [26] Yaqiang Liu, Zhenlian An*, Jun Cang, Yewen Zhang, and Feihu Zheng: "SignificantSuppression of Surface Charge Accumulation on Epoxy Resin by DirectFluorination", 2012 IEEE Trans. Dielectr. Electr. Insul., 19, 1143-1150. [27] Zhenlian An*,Chenxia Liu, Xuan Chen, Feihu Zheng, and Yewen Zhang: “Correlation betweenspace charge accumulation in polyethylene and its fluorinated surface layercharacteristics”, 2012 J. Phys. D: Appl.Phys., 45 035302 (8pp).[28] Zhenlian An*, Mingjun Mao, Jun Cang, YewenZhang, and Feihu Zheng: “Significantly improved piezoelectric thermal stabilityof cellular polypropylene films by high pressure fluorination andpost-treatments“, 2012 J. Appl. Phys.,111 024111 (5pp). [29] Zhenlian An*, JunCang, Xuan Chen, and Yaqiang Liu: “Method for Investigating Threshold Field ofCharge Injection at Electrode/Dielectric Interfaces by Space Charge Observation”,2012 Appl. Phys. Lett., 101, 172902 (4pp).  学生信息 当前位置：教师主页 > 学生信息 入学日期 所学专业 学号 学位 招生信息 当前位置：教师主页 > 招生信息 招生学院 招生专业 研究方向 招生人数 推免人数 考试方式 招生类别 招生年份