王波
时间:2024-04-06 01:37 来源: 作者: 点击:次
个人经历 Personal experience 工作经历 教育经历 2003年10月----2017年2月，西北工业大学力学与土木建筑学院，副教授2017年3月----今，西北工业大学航空学院，副教授2011年9月-2012年9月，英国Cranfield University，访问学者 1994年9月----1998年7月 青岛科技大学机械工程学院，本科 1998年9月----2003年7月 西北工业大学工程力学系，博士 教育教学科学研究 Scientific Research 主要从事复合材料及其结构的力学性能研究工作，主要包括：陶瓷基复合材料的损伤失效机理、本构模型、失效判据以及热冲击下的损伤演化和寿命预测；树脂基复合材料环境下的性能演化机理；铝基复合材料的增强增韧机理及动静态载荷作用下的损伤失效行为。先后主持和参与国家重大专项、科技部重点研发计划、国家自然基金等课题10余项，其它研究课题30余项。 荣誉获奖学术成果 Academic Achievements 近几年主要论文[1] Xianglong Zeng, Yuhao Ning, Yang Yang, Bo Wang, Chengyu Zhang, Tao Suo, Qiong Deng, A multiscale damage prediction model for the thermal shock of carbon fiber-reinforced silicon carbide matrix composites, MECH ADV MATER STRUC, 2022, ahead-of-print(ahead-of-print): 1-21.[2] Xianglong Zeng, Hongyan Shao, Rong Pan, Bo Wang, Qiong Deng, Chengyu Zhang, Tao Suo, Real-time damage analysis of 2D C/SiC composite based on spectral characters of acoustic emission signals using pattern recognition, ACTA MECH SINICA-PRC, 2022, 38(10): 422177.[3] Xiang Wang, Bo Wang, Yu Zhang, Yongyong Suo, Purong Jia, Feng Huang, Dispersion of Mechanical Properties of High-Strength Glass Fibre Composites in Hygrothermal Environment, POLYMERS-BASEL, 2022, 14(17): 3514.[4] Xianglong Zeng, Yang Yang, Qiong Deng, Bo Wang, Chengyu Zhang, Thermal shock response behaviour of carbon fibre reinforced silicon carbide matrix composites prepared by chemical vapour infiltration at different heating rates, CERAM INT, 2021,[5] Chengpeng Yang, Fei Jia, Bo Wang, Tao Huang, Guiqiong Jiao, Constitutive model and failure criterion for orthotropic ceramic matrix composites under macroscopic plane stress, J AM CERAM SOC, 2021, 104(2): 1002-1013.[6] Wei Hu, Jinzi Huang, Yihang Li, Lianyang Chen, Tianhao Guan, Yupeng Sun, Bo Wang, Xi Zhou, Tao Suo, High-temperature compressive performance of the pre-impacted 2D-C/SiC composites: Coupling effect of pre-impact energy, temperature, temperature-keeping duration, and strain rate, CARBON, 2021, 184: 728-751.[7] Xiang Wang, Purong Jia, Bo Wang, Progressive failure model of high strength glass fiber composite structure in hygrothermal environment, COMPOS STRUCT, 2021: 114932.[8] Yongyong Suo, Jintao Li, Zhilun Deng, Bo Wang, Quanzhao Wang, Dingrui Ni, Purong Jia, Tao Suo, High-Temperature Compressive Response of SiCp/6092Al Composites under a Wide Range of Strain Rates, MATERIALS, 2021, 14(21): 6244.[9] L. Su, Z. Yang, X. Wang, Z. Zou, B. Wang, G. Hodes, N. Chang, Y. Suo, Z. Ma, H. Wang, Y. Liu, J. Zhang, S. Wang, Y. Li, F. Yang, J. Zhu, F. Gao, W. Huang, S. Liu, Flexible Diodes/Transistors Based on Tunable p-n-Type Semiconductivity in Graphene/Mn-Co-Ni-O Nanocomposites, Research (Wash D C), 2021, 2021: 9802795.[10] 李锦涛, 王波, 杨扬, 张程煜, 考虑氧化损伤的陶瓷基复合材料弹性模量多尺度预测模型, 复合材料学报, 2021, 38(10): 3432-3442.[11] 曾翔龙, 宗郑, 邓琼, 王波, 李玉龙, 张程煜, SiC-BN层状陶瓷复合材料叠层方式优化设计, 复合材料学报, 2021, 38(10): 3424-3431.[12] 黄喜鹏, 王波, 常杰, 基于声发射技术的陶瓷基复合材料声速特性, 复合材料学报, 2021, 38(05): 1517-1525.[13] Yongyong Suo, Zhilun Deng, Bo Wang, Yaohua Gong, Purong Jia, Constitutive model of metal matrix composites at high strain rates and its application, Materials Today Communications, 2021, 27: 102328.[14] Xianglong Zeng, Qiong Deng, Bo Wang, Zhilun Deng, Xudong Wang, Chengyu Zhang, The Influence of Rod Waveguide on Acoustic Emission Signal of Different Frequencies, Singapore: Springer Singapore, 2021, 487-501.[15] Yongyong Suo, Bo Wang, Purong Jia, Yaohua Gong, The effect of fabrication defects on the mechanical behaviors of metal matrix composites, Materials Today Communications, 2020, 25: 101663.[16] Yongyong Suo, Bo Wang, Purong Jia, Yaohua Gong, Numerical analysis of mechanical properties and particle cracking probability of metal matrix composites, Materials Today Communications, 2020, 24: 101082.[17] Long Zhang, Purong Jia, Tao Huang, Bo Wang, Optimal design method for composite blades using stiffness weights, COMPOS STRUCT, 2020, 238: 111880.[18] 王西, 王克杰, 柏辉, 宋卓林, 王波, 张程煜, 化学气相渗透2D-SiC_f/SiC复合材料的蠕变性能及损伤机理, 无机材料学报, 2020, 35(07): 817-821.[19] Wei Hu, Jinzi Huang, Chao Zhang, Tengfei Ren, Tianhao Guan, Kairong Wu, Bo Wang, Raza Muhammad Aamir, Muhammad Zakir Sheikh, Tao Suo, Effect of shear strain rate on interlaminar shear behavior of 2D-C/SiC composites: A damage transition from notch ends initiation to gauge section initiation, CARBON, 2020, 167: 770-784.[20] Chao Zhang, Tengfei Ren, Xinyue Zhang, Wei Hu, Zhen Wang, Bo Wang, Tao Suo, Study of dynamic compressive behaviors of 2D C/SiC composites at elevated temperatures based on in-situ observation, J EUR CERAM SOC, 2020, 40(15): 5103-5119.[21] Wei Hu, Tianhao Guan, Mengting Gao, Tengfei Ren, Jinzi Huang, Tao Suo, Bo Wang, Chao Zhang, High-velocity impact behaviors and post-impact tension performance of 2D-C/SiC composite beams, CERAM INT, 2020, 46(9): 13282-13291.[22] 王波, 吴亚波, 黄喜鹏, 潘文革, 成来飞, 2D-C/SiC复合材料面内剪切性能统计及强度B基准值, 材料工程, 2019, 47(01): 131-138.[23] 韩旭旭, 张程煜, 陈博, 王波, 张巧君, 韩栋, 李玫, 2D-SiC_f/SiC复合材料抗拉强度统计分布规律, 复合材料学报, 2019, 36(02): 434-440.[24] 黄喜鹏, 王波, 杨成鹏, 潘文革, 刘永胜, 基于声发射信号的不同密度C/SiC复合材料损伤演化, 复合材料学报, 2019, 36(02): 425-433.[25] Xinyue Zhang, Tao Suo, Bo Wang, Chao Zhang, Xipeng Huang, Yingtao Yuan, Zhen Wang, Chengyu Zhang, Fatigue behaviour and residual strength evolution of 2D C/SiC Z-pinned joints prepared by chemical vapour infiltration, J EUR CERAM SOC, 2019, 39(13): 3575-3582.[26] 黄喜鹏, 王波, 杨成鹏, 潘文革, 刘小瀛, 基于声发射信号的三维针刺C/SiC复合材料拉伸损伤演化研究, 无机材料学报, 2018, (06): 609-616.[27] 张龙, 贾普荣, 王波, 徐斌, 考虑弯扭耦合效应的复合材料叶片铺层优化方法, 西北工业大学学报, 2018, 36(06): 1093-1101.[28] Long Zhang, Tingting Liu, Bo Wang, Purong Jia, Fabrication and Performance of Nanocomposites Containing Zirconia Particles, IOP Conference Series: Materials Science and Engineering, 2018, 381(1): 12053-12056.[29] 王波, 吴亚波, 郭洪宝, 贾普荣, 李俊, 2D-C/SiC复合材料偏轴拉伸力学行为研究, 材料工程, 2017, (07): 91-96.[30] C. P. Yang, L. Zhang, B. Wang, T. Huang, G. Q. Jiao, Tensile behavior of 2D-C/SiC composites at elevated temperatures: Experiment and modeling, J EUR CERAM SOC, 2017, 37(4): 1281-1290.[31] HongBao Guo, PuRong Jia, Bo Wang, ChengPeng Yang, Jun Li, Characterisation and analysis of the damage coupling effects of a 2D-C/SiC composite under proportional loading conditions, CERAM INT, 2016, 42(1, Part A): 1007-1014.[32] Chengyu Zhang, Mengmeng Zhao, Yongsheng Liu, Bo Wang, Xuanwei Wang, Shengru Qiao, Tensile strength degradation of a 2.5D-C/SiC composite under thermal cycles in air, J EUR CERAM SOC, 2016, 36(12): 3011-3019.[33] 郭洪宝, 王波, 贾普荣, 杨成鹏, 平纹编织陶瓷基复合材料面内剪切细观损伤行为研究, 力学学报, 2016, (02): 361-368.[34] Jun Li, Guiqiong Jiao, Bo Wang, Liang Li, Chengpeng Yang, Damage characteristics and constitutive modeling of the 2D C/SiC composite: Part II – Material model and numerical implementation, CHINESE J AERONAUT, 2015, 28(1): 314-326.[35] 郭洪宝, 贾普荣, 王波, 矫桂琼, 曾增, 基于迟滞行为的2D-SiC/SiC复合材料组份力学性能分析, 力学学报, 2015, (02): 260-269.[36] HongBao Guo, Bo Wang, PuRong Jia, ChengPeng Yang, In-plane shear behaviours of a 2D-SiC/SiC composite under various loading conditions, CERAM INT, 2015, 41(9, Part A): 11562-11569.[37] 王亚杰, 王波, 张龙, 马宏毅, 玻璃纤维-铝合金正交层板的拉伸性能研究, 材料工程, 2015, (09): 60-65.[38] C. P. Yang, G. Q. Jiao, B. Wang, T. Huang, Mechanical degradation mechanisms of 2D-C/SiC composites: Influences of preloading and oxidation, J EUR CERAM SOC, 2015, 35(10): 2765-2773.[39] C. P. Yang, G. Q. Jiao, B. Wang, T. Huang, H. B. Guo, Damage-based failure theory and its application to 2D-C/SiC composites, Composites Part A: Applied Science and Manufacturing, 2015, 77: 181-187.[40] 郭洪宝, 王波, 甄文强, 杨成鹏, 矫桂琼, 2D-C/SiC复合材料开孔件拉伸强度有限元计算, 复合材料学报, 2014, (02): 448-455.[41] 李潘, 王波, 甄文强, 矫桂琼, 2D-SiC/SiC复合材料拉伸加卸载行为, 复合材料学报, 2014, (03): 676-682.[42] Jun Li, Guiqiong Jiao, Bo Wang, Chengpeng Yang, Gang Wang, Damage characteristics and constitutive modeling of the 2D C/SiC composite: Part I – Experiment and analysis, CHINESE J AERONAUT, 2014, 27(6): 1586-1597.[43] 张龙, 王波, 矫桂琼, 黄涛, 纤维桥连对复合材料Ⅰ型层间断裂韧性的影响, 航空学报, 2013, (04): 817-825.[44] 李俊, 矫桂琼, 王波, 王刚, 二维编织C/SiC复合材料非线性损伤本构模型与应用, 复合材料学报, 2013, 30(01): 165-171.[45] Chengyu Zhang, Xuanwei Wang, Yongsheng Liu, Bo Wang, Dong Han, Shengru Qiao, Yong Guo, Tensile fatigue of a 2.5D-C/SiC composite at room temperature and 900 °C, MATER DESIGN, 2013, 49(0): 814-819.[46] Chang Yanjun, Jiao Guiqiong, Zhang Keshi, Wang Bo, Ju Jiannwen, APPLICATION AND THEORETICAL ANALYSIS OF C/SiC COMPOSITES BASED ON CONTINUUM DAMAGE MECHANICS, ACTA MECH SOLIDA SIN, 2013, 26(05): 491-499.[47] 郭洪宝, 王波, 矫桂琼, 刘永胜, 2D-C_f/SiC复合材料缺口试件拉伸力学行为研究, 材料工程, 2013, (05): 83-88.[48] 李俊, 矫桂琼, 王刚, 王波, 室温下C/SiC复合材料螺纹紧固件的拧紧特性, 复合材料学报, 2012, (05): 164-170.[49] 叶聪杰, 矫桂琼, 王波, 黄涛, 含双向布复合材料开孔薄板拉伸性能研究, 机械强度, 2012, (05): 767-771.[50] 郭洪宝, 王波, 矫桂琼, 杨成鹏, 刘永胜, 2D-C/SiC复合材料开孔试件拉伸特性和失效分析, 航空材料学报, 2012, 32(04): 80-86.[51] 杨成鹏, 矫桂琼, 王波, C/SiC复合材料氧化残余强度计算模型, 机械强度, 2011, (01): 106-110.[52] 常岩军, 张克实, 矫桂琼, 王波, 纤维束内部孔洞对2.5D-C/SiC复合材料弹性性能的影响研究, 工程力学, 2011, (03): 230-233.[53] 李航, 矫桂琼, 赵龙, 王波, 含切口复合材料加筋板的压缩剩余强度研究, 工程力学, 2011, 28(08): 133-137.[54] 杨成鹏, 矫桂琼, 王波, 2D-C/SiC复合材料的单轴拉伸力学行为及其强度, 力学学报, 2011, (02): 330-337.[55] 梁仕飞, 矫桂琼, 王波, 三维机织C/C-SiC复合材料弹性性能预测, 复合材料学报, 2011, (01): 138-142.[56] Cheng-Peng Yang, Gui-Qiong Jiao, Bo Wang, Modeling oxidation damage of continuous fiber reinforced ceramic matrix composites, ACTA MECH SINICA-PRC, 2011, 27(3): 382-388. 科学研究社会兼职 Social Appointments 中国力学学会会员中国复合材料学会高级会员（2011-）中国航空学会复合材料专业委员会委员（2014-） 学术成果团队信息 Team Information 综合介绍 |